Description:

Digital Barcol Impressor portable hardness tester is a type of Indentation Hardness tester. It test quickly, easy operation and almost nondestructive, used to test the hardness of the Aluminum and Aluminum alloys, confirms to the American Standard ASTM B648, ASTM HD2583-07 and GB/T 3854-2005.

 

Applications:

934-1 Digital Barcol Impressor mainly used to test the Aluminum and Aluminum hardness, also suitable for the other Soft metal and FRP products. It could measure the extra large, extra wide and extra thick workpiece and assembly parts, to measure the boards, belt materials, section materials, forgings and castings, etc.

 

Widely used model in the Aluminum industry is W-20 Webster hardness tester, it is suitable for most of Aluminum alloy. But for the super hard aluminum alloy, need to use the W-B75 Webster hardness tester or the Barcol Impressor, such as the 2024, 7075,etc. For the pure aluminum, low hard aluminum alloy, extra thick aluminum alloy, and other material not suitable for the Webster hardness tester, should use the Barcol hardness tester.

 

The Barcol Impressor usually as the supplement of the Webster harness tester.

 

Features:

Small size and light weight, easy to carry.

The device could switch to the hardness HW, HRE, HRF, HV, HB

The screen display the measuring data and the calibration device no need to disassemble.

With the bracket rotary positioning device.

Simple operation, single hand operation is okay.

Large measuring range, the testing range equivalent to the Brinell harness 25~135 HB.

High sensitivity and with 100 scales.

Test the material on one side of the workpiece, without the moving or supporting the workpiece, so it could used to measure the extra large and extra thick workpiece and the assemble parts.

 

Technical parameter:

Measuring range: 0~100HBa

Effective range: 25~135 HBW

Resolution: 0.1HBa

Indication Error: 42~52 HBa ±2.0 HBa

              84~88 HBa ±1.0 HBa   

Repeatability Error: 42~52 HBa ±2.5 HBa

                 84~88 HBa ±1.5 HBa

 

Standard configuration:

Tester             1pc

Calibration block    2pc

Calibration wrench  1pc

Spare penetrators   1pc

Charger           1pc

Operation manual   1pc