OC-F08 Mounted Carbon Dioxide CO2 gas leak detection

2019-4-4      View:
  • Brand   Henan Oceanus
  • Type   OC-F08
  • Inquire Now
Introduction

CO2 gas alarm

Description:

OC-F08 series online gas detector used the original imported sensor and the ultra low power 32 bit microprocessor, so with the advantages of high precision, good repeatability, stable signal, respond quickly, etc. Possible connected with many controller system, such as PLC, DCS, computer and other, with the function of remote monitor and alarm, data logger and analysis.

Common applications is gas safety inspection and alarm for industrial scene, such as petroleum refinery, chemical plants, LPG stations, boiler rooms, gas stations, paint spray booths, metallurgy, mining, fire, environmental protection, etc., where need to inspect the Carbon Dioxide CO2 gas concentration.

CO2 gas detection

Features:
4-20mA standard analog signal and RS485 digital signal output, 200~1000HZsignal output, relay output, data restore, data logger(optional);  
LED screen displaying the gas concentration, gas type, unit, instrument status etc.
Independent air chamber, the sensor is not required to replace the sensor calibration, automatic identification of key parameters of the sensor
Protection function to prevent high gas concentration attack.

Display the gas concentration in ppm, %vol and mg/m3 is selectable.

Infrared remote controller operation;

With the 16bit ADC acquisition chip, designed with four-layer circuit board, so with high anti-interference ability.

With the Ex-proof certificate, the Ex-proof grade is Exd II CT6.

Optional wireless transmitting and receiving module.

gas alarming device

Technical Parameter:

Applicable Gas

Carbon Dioxide (CO2)

Detecting Range

0-20ppm50ppm100ppm200ppm500ppm1000ppm2000ppm5000ppm, 0~20%vol, 0~100%vol or customized

Resolution

0.01ppm, 0.1ppm, 1ppm, 0.01%vol

Sampling

Diffusion or pump-suction, circulation selectable

Accuracy

≤±3%F.S

Repeatability

≤±1%

Zero drift

≤±1%(F.S/year)

Sensor Type

Infrared sensor

Sensor Life

2~3 years

Response Time (T90)

≤20s

Alarming mode

Audible-visual alarmOptional

Operating Environment

Temperature: -30℃~60℃ (Customized for special demands)

Humidity: ≤95%RH (non-condensing); if >90%RH, can add the filter

Pressure: 86kPa~106kPa

Working Voltage

24V DC(16~30VDC)

Output Signals

(Standard)Three-wire system 4~20mA standard signals output, available for PLC, DCS, etc;

(Optional) Four-wire system RS485 digital signal output;

(Optional) Frequency signal 200~1000Hz output;

Two-level relay output:220VAC 0.5A, 5VDC 0.5A

Installation Means

Wall mounted, Pipe type(Thread:M40*1.5 )

Material of Body

Cast aluminum

Explosion-proof Index

Ex d IIC T6

Protection Grade

IP66

Electrical Interface

3/4″NPT(Female Screw)1/2″NPT(Female Screw)

Transmit Distance

≤2000m

Dimension

210 mm×140 mm×92 mmL×W×H

Weight

About 1.5Kg

Warranty

12 months

Standards

GB15322.1-2003GB3836.1-2010GB3836.2-2010GB3836.4-2010


online CO2 gas monitor


fixed CO2 gas leak detector

More Products