Just a few days ago, a staff of the Oceanus gas detector at work received a call from a customer. The customer on the phone anxiously asked, "I see the detector is very dirty, so I washed it with water, and after that the detector can not be open, what should I do?" After hearing from the customer, the mood at that time was also unable to use words expression.

Oceanus would like to remind you that no matter how dirty the oxygen detector or other detectors are, they can not be washed with water, especially the sensor parts. If the water entry into the sensor, it will be destroy.

Oxygen detector is used to help staff work safely in anoxic closed-loop environment. It can help people react to the air environment of the work site in the first time. When the field air is hypoxic, the instrument will send an alarm signal to remind staff to quickly evacuate the scene to prevent staff from asphyxiating due to hypoxia. Because the construction environment is not fixed, the dirty, messy and dirty environment will inevitably make the instrument dirty. It doesn't matter if the instrument is dirty. Don't wash it in water or with water.

The correct method of cleaning and nursing oxygen detector is: first, slowly clean the dirt on the surface of the instrument with a wet paper towel or a wet cloth twisted to dry water; secondly, if the sensor part of the instrument can be disassembled, remove the filter screen of the sensor part and wash it with water, then re-install it after drying; finally, clean the display screen of the instrument, and do not use too much force in cleaning. Gas, gently wipe back and forth until the screen is clean and bright.