A hydrogen detector is an instrument specially used to detect hydrogen concentration. It can monitor the concentration of hydrogen in the environment in real time and issue an alarm when the concentration exceeds the standard. However, when we use hydrogen detectors, cross-interference sometimes occurs. Problems can affect the accuracy and reliability of the instrument. So do you know that cross interference occurs when using a hydrogen detector, what should you do?

 

Measures to deal with cross-interference when using a hydrogen detector:

 

1. Recalibrate the instrument:

 

Calibration is key to ensuring the accuracy of a hydrogen detector. Please calibrate according to the hydrogen detector instructions and make sure all parts are installed and adjusted correctly.

 

2. Check the surrounding environment:

 

Make sure there are no other gases or pollutants around the hydrogen detector. If so, take appropriate steps to remove or quarantine them.

(Click on the image to jump to product details)

 

3. Use filters:

 

Some cross-interference may be caused by dust or other particles in the air. In this case, the impact of these particles can be reduced by installing an appropriate filter at the inlet of the hydrogen detector.

 

4. Update software:

 

If your hydrogen detector has software update capabilities, please check to see if an update is available. This may resolve some cross-interference issues.

 

5. Contact the manufacturer:

 

If you are unable to resolve the cross-interference issue, it is recommended that you contact the manufacturer or supplier of the hydrogen detector for assistance. They may be able to provide more detailed troubleshooting steps or advice.