Generally, we suggest that different gas detectors should be used in different working environments and scenes, because most of the gases produced in each production workshop are different. When choosing a gas detector, the type and concentration range of the detected gas should be confirmed first.

If it contains a lot of methane and other hydrocarbons, it is undoubtedly the most appropriate to choose combustible gas detector.

This is not only because the combustible gas detector is simple in principle and widely used, but also has the function of convenient maintenance and calibration.

In case of toxic gases such as carbon monoxide, hydrogen sulfide, etc., specific priorities must be selected to ensure the safety of gas detector staff.

If there are more kinds of gas, the effect of choosing composite gas detector will be twice as much as half of the effort.

Can be used for: different industrial environment, choose different types of gas detector.

Fixed gas detection

This is the production process of industrial equipment and the use of more probes. It can be installed at specific points.

Special detection for gas leakage detection. A fixed detector usually consists of two parts.

The circuit, power supply and display alarm device constitute the secondary instrument for monitoring. And the first part, its original detection.

However, in this process, the technology is more suitable for fixed detection and needs to be continuous, and the ethylene oxide waste gas treatment is stable for a long time. They must also be based on their presence on site and choose the type of gas concentration, but also note that it is most likely to leak to a specific part of the gas, for example, select the most effective sensor installed in the gas alarm.

Portable gas detector 

As a kind of portable device, it has the advantages of simple operation, compact structure, different production locations, using alkaline electricity and so on.

It can be used for 1000 hours; The new detectors LEL and PID use composite instrument rechargeable batteries, so they can normally work for nearly 12 hours continuously, so they use a wider range of equipment, such as factories and health departments.

When people enter tunnels and other places, they have to test, but also outside the confined space. At this point, you have to choose how much gas is installed in the sampling pump. At this time, oxygen detector and carbon monoxide detector are commonly used.

More details, pls chick--