Coating thickness gauge split type

OC-790 split type coating thickness gauge used to measure the coating thickness in the laboratory and engineering environment, including manufacturing, metal processing industry, chemical industry, commodity inspection and testing fields.

 

This coating thickness gauge produced according to the following standards:

GB/T 4956-1985 non-magnetic coating thickness measurement on magnetic metal substrate, Magnetic Method

GB/T 4957-1985 non-conductive coating thickness measurement on non-magnetic metal substrate, Eddy Current Method

JB/T 8393-1996 magnetic and eddy current coating thickness

JJG 889-95 "Reluctance thickness "

JJG 818-93 "Eddy Current Thickness"

Features:

 Working principle: both Magnetic Method and Eddy Current Method to measure the non-magnetic coating on a magnetic metal substrate,  and non-conductive coating on non-magnetic metal substrate.

  Single-point or two-point method used to correct probe system deviation.

 Swift automatic identification of iron or non-iron substrate.

 Speaker beep when working.

 Power-off automatically when idle;  manually power-off available.

  Negative display function to ensure the accuracy of zero point calibration.

  Ultra-low power consumption, less than 10 μA in standby mode.

Parameter:

  Measuring range: 0-1250 μm

      Resolution: 0.1/1

 Power supply: 2 * AA batteries

  Measurement deviation: zero calibration ± (1 + 3% H);

 two-point calibration ± [(1% ~ 3% H)] H + 1.5

 Working temperature: 0-40 ℃

 Working  humidity: ≤85%

Minimum substrate: 10 * 10mm

  Minimum curvature: 5mm convex; 5mm concave

 Thinnest substrate: 0.4mm

  Weight: 99g (with battery)

  Size: 102mm * 66mm * 24mm